Key Features

• Equivalent to or surpassing the power of a 110-size 2-stroke glow engine for 9–15 lb (4–6.8 kg) airplanes
• Ideal for 3D airplanes up to 11 lb (5 kg)
• High-torque, direct-drive alternative to inrunner brushless motors
• Includes mount and mounting hardware
• High-quality construction with ball bearings and hardened 8mm steel shaft
• Includes two 12mm prop shaft adapters tapped out for 10–32 threads
• Ideal for models requiring up to 2000 watts of power
• External rotor design for better cooling
• Slotted 14-pole outrunner design

Overview

The Power 110 is designed to deliver clean and quiet power equivalent to or surpassing the power of a 110-size 2-stroke glow engine for sport and scale airplanes weighing 9 to 15 pounds (4 to 6.8 kg), 3D airplanes up to 11 pounds (5 kg), or models requiring up to 2000 watts of power.

It will provide excellent performance in the new Hangar 9 Funtana X 100 ARF or ShowTime 4D 90 ARF. The Power 110 provides perfect power for the Ultra Stick Lite 120 ARF.

Needed to Complete

85A HV brushless ESC
8S–9S Li-Po or 24- to 32-cell Ni-MH/Ni-Cd
17x8 to 19x10 prop

Specs

Type:	Brushless outrunner
Size:	Equivalent to or surpassing the power of a 1.10 size 2-sroke glow engine
Bearings or Bushings:	One 8 x 19 x 6mm Bearing, and Two 8 x 16 x 5mm Bearings
Wire Gauge:	13
Recommended Prop Range:	17x8 to 19x10
Voltage:	28.2–38.4
RPM/Volt (Kv):	295
Resistance (Ri):	.03 ohms
Idle Current (Io):	1.20A @ 10V
Continuous Current:	55A
Maximum Burst Current:	65A (15 sec)
Cells:	24–32 Ni-MH/Ni-Cd or 8S–9S Li-Po
Speed Control:	85A High Voltage Brushless
Weight:	490 g (17.5 oz)
Overall Diameter:	63mm (2.50 in)
Shaft Diameter:	8mm (.3 in) (Includes two 12mm threaded prop shaft adapters with 1.5 pitch)
Overall Length:	54mm (2.10 in)

Needed to Complete

85A HV brushless ESC
8S–9S Li-Po or 24- to 32-cell Ni-MH/Ni-Cd
17x8 to 19x10 prop

Tech Notes

Maximum operating temperature: 220 degrees Fahrenheit.

Adequate cooling is required for all motor operation at maximum current levels.

Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.